SC
SC-001 — Weld Thickness
Engineering preview · Client-side · Deterministic Decimal engine · Not for production approval
Weld
Configuration
Structural weld
Precision weld
Design load
i
Applied design force
The load the weld must carry, in Newtons. Include safety intent here or via safety factor.
N
Weld length
i
Effective weld length
Total load-bearing weld length. Longer weld lowers required leg.
mm
Weld strength
i
Allowable weld metal strength
Design shear / allowable stress of the weld metal, MPa.
MPa
Safety factor
i
Design safety factor
Applied to load or against strength. 2.0 typical structural.
-
Material thickness
i
Base material thickness
Drives the code minimum leg; weld leg should not exceed it unduly.
mm
Joint type
i
Fillet vs butt
Fillet governed by leg/throat; butt by penetration. Affects the governing check.
fillet
butt
Live Result — Required Leg
—
Generate Report
Reset
Engineering Report Ready
Configure inputs on the left panel.
All values update in real-time.
Click "Generate Report" for a predicted analysis.