Money at risk
Primary exposure total from your job inputs
Job risk check
Sheet Metal Scrap Risk Analyzer
See how much money a sheet metal job can lose through cutting scrap, offcuts, bend mistakes, rework hours and finishing cost before you quote it.
Where money is usually lost
Money is usually lost in scrap, offcuts, bend rework and finishing—not in the headline material quote.
What the paid report shows
The paid report turns your job numbers into a clear check before quoting, repeating or committing to the work.
Status check
Safe, watch or risky on the main drivers
Job file output
Save PDF/CSV for the team, client or job folder
This analyzer also breaks out
- Excess cutting scrap
- Offcut loss
- Bend or fit-up rework
- Finishing cost impact
- What to check before quoting
The sample report shows report layout and section structure—it is not calculated from your inputs on this page.
How this check works
Why this check matters
This analyzer is built around job numbers that usually move margin: material waste, rework, labor time, waiting time, finishing cost and the gap from target rates.
Example scenario
Sample case — not a customer result
- Job type
- Sheet metal enclosure job — 50 parts, powder coat finish
- Main input numbers (sample)
- Material cost: $2,400
- Scrap rate: 11% (shop target: 6%)
- Rework: 4 hours at $65/hr
- Finishing (deburr + coat): $320
- What the analyzer flags
- Scrap above target rate
- Bend or fit-up rework hours
- Finishing cost on the job file
- What to check first
- Nest layout and offcut use before quoting
- Bend sequence and fit-up time on similar jobs
- Whether finishing hours match the quote sheet
- What the report helps you decide
- Split money at risk between scrap, rework and finishing so you know what to fix before quoting the next job.
How the estimate is built
The analyzer uses the numbers you enter, compares them with your target or expected range, and estimates where the job may lose money. It is a job check, not a guarantee.
Numbers used
Sample inputs above are illustrative only. Your report uses the numbers you enter on this page and the assumption notes listed below.
What to check before using the result
Match inputs to your job file, quote sheet or shop floor records. If a cost item is missing or the result does not match your field experience, send tool feedback before relying on the output.
Does this formula fit your job?
Tell us if a cost item is missing or the result does not match your field experience. We use field feedback to improve formulas, cost items and sector fit.
Send tool feedbackDoes this formula fit your job?
Tell us if a cost item is missing, the result looks off, or your sector needs a different setup.